Installation

Installation is easy through CommandBox and ForgeBox. Simply type box install qb to get started.

Usage

To start a new query, instantiate a new Builder: wirebox.getInstance('QueryBuilder@qb').

By default, qb uses a generic Grammar. You can specify your specific grammar in ColdBox by setting the defaultGrammar in your moduleSettings.

moduleSettings = {
    qb = {
        defaultGrammar = "MySQLGrammar@qb"
    }
};

The grammars provided by qb are:

• MySQLGrammar

• OracleGrammar

• PostgresGrammar

• SqlServerGrammar

If you are not using WireBox, just make sure to wire up the Builder object with the correct grammar:

var grammar = new qb.models.Grammars.MySQLGrammar();
var builder = new qb.models.Query.QueryBuilder( grammar );

Integrating With FW/1

Note: These instructions assume a basic knowledge of FW/1, a working FW/1 application structure with qb installed in the /subsystems directory (manually or via CommandBox), and a database configured to run with your application.

Wiring Up With DI/1

Once the application structure is setup, now we need to wire up qb to a bean factory using DI/1.

First we will add a mapping in Application.cfc.

this.mappings = {
    "/qb" = expandPath("./subsystems/qb")
};

Next we need to tell DI/1 where qb's components are and how to reference them for later use in the application. We can do so by defining the configuration settings in the variables.framework.subsystems struct in Application.cfc. The example below makes use of a load listener to declare each component instance and pass in any constructor arguments.

qb = {
  diLocations = "/qb/models",
  diConfig = {
    loadListener = function( di1 ) {
      di1.declare( "BaseGrammar" ).instanceOf( "qb.models.Query.Grammars.Grammar" ).done()
         .declare( "MySQLGrammar" ).instanceOf( "qb.models.Query.Grammars.MySQLGrammar" ).done()
         .declare( "QueryUtils" ).instanceOf( "qb.models.Query.QueryUtils" ).done()
         .declare( "QueryBuilder" ).instanceOf( "qb.models.Query.QueryBuilder" )
         .withOverrides({
            grammar = di1.getBean( "MySQLGrammar" ),
            utils = di1.getBean( "QueryUtils" ),
            returnFormat = "array"
         })
         .asTransient();
    }
  }
}

Usage In Your FW/1 Application

Now that everything is configured, you can launch your application with CommandBox by entering start in the terminal or use whatever method you're accustomed to.

To access qb from your application's code, you can call on it by using getBeanFactory().

// Create an instance of qb
builder = getBeanFactory( "qb" ).getBean( "QueryBuilder" );
// Query the database
posts = builder.from( "Posts" ).get();
posts = builder.from( "Posts" ).where( "IsDraft", "=", 0 ).get();

For further instructions on getting started with qb & FW/1, refer to this blog post.

A query builder is a stateful, transient object. That means that if you want to execute two different queries, you need two separate instances of QueryBuilder.

// This will cause you pain and grief...

var user = query.from( "users" )
  .where( "username", rc.username )
  .first();

var posts = query.from( "posts" ).get();
// This will error because `username` is not a column in `posts`.

As such, be careful when injecting QueryBuilder in to a component. If the component is a singleton, you will need to create the QueryBuilder inline or use a provider. This applies to ColdBox handlers as well.

component {

    property name="query" inject="QueryBuilder@qb";

    function create( event, rc, prc ) {
        query.table( "posts" )
            .where( "id", rc.id )
            .update( event.getOnly( [ "body" ] ) );
    }

}

While the above may seem innoculous, it can run in to issues as multiple requests come in to your application. Each request is sharing the same query builder instance and subsequent requests will have unintended results as the where clause keeps growing request after request.

The solution is to either create the QueryBuilder inline, ensuring that each request has its own query to execute:

component {

    function create( event, rc, prc ) {
        getInstance( "QueryBuilder@qb" )
            .table( "posts" )
            .where( "id", rc.id )
            .update( event.getOnly( [ "body" ] ) );
    }

}

Or to use a WireBox provider to create a new query each time it is accessed:

component {

    property name="query" inject="provider:QueryBuilder@qb";

    function create( event, rc, prc ) {
        query.table( "posts" )
            .where( "id", rc.id )
            .update( event.getOnly( [ "body" ] ) );
    }

}

newQuery

Once you have access to a QueryBuilder instance, you can create a new query using the same datasource, utils, returnFormat, paginationCollector, columnFormatter, and defaultOptions as the current QueryBuilder instance.

// This will cause you pain and grief...

var user = query.from( "users" )
  .where( "username", rc.username )
  .first();

var posts = query.newQuery().from( "posts" ).get();
// This will work as we expect it to.

Introduction

qb is a fluent query builder for CFML. It is heavily inspired by Eloquent from Laravel.

Using qb, you can:

• Quickly scaffold simple queries

• Make complex, out-of-order queries possible

• Abstract away differences between database engines

Requirements

• Adobe ColdFusion 2016+

• Lucee 5+

qb supports four major database grammars:

• MySQL (MySQLGrammar)

• Oracle (OracleGrammar)

• Postgres (PostgresGrammar)

• Microsoft SQL Server (SqlServerGrammar)

Installation

Installation is easy through CommandBox and ForgeBox. Simply type box install qb to get started.

Code Samples

Compare these two examples:

// Plain old CFML
q = queryExecute("SELECT * FROM users");

// qb
query = wirebox.getInstance('QueryBuilder@qb');
q = query.from('users').get();

The differences become even more stark when we introduce more complexity:

// Plain old CFML
q = queryExecute(
    "SELECT * FROM posts WHERE published_at IS NOT NULL AND author_id IN ?",
    [ { value = '5,10,27', cfsqltype = 'CF_SQL_NUMERIC', list = true } ]
);

// qb
query = wirebox.getInstance('QueryBuilder@qb');
q = query.from('posts')
         .whereNotNull('published_at')
         .whereIn('author_id', [5, 10, 27])
         .get();

With qb you can easily handle setting order by statements before the columns you want or join statements after a where clause:

query = wirebox.getInstance('QueryBuilder@qb');
q = query.from('posts')
         .orderBy('published_at')
         .select('post_id', 'author_id', 'title', 'body')
         .whereLike('author', 'Ja%')
         .join('authors', 'authors.id', '=', 'posts.author_id')
         .get();

// Becomes

q = queryExecute(
    "SELECT post_id, author_id, title, body FROM posts INNER JOIN authors ON authors.id = posts.author_id WHERE author LIKE ? ORDER BY published_at",
    [ { value = 'Ja%', cfsqltype = 'CF_SQL_VARCHAR', list = false, null = false } ]
);

qb enables you to explore new ways of organizing your code by letting you pass around a query builder object that will compile down to the right SQL without you having to keep track of the order, whitespace, or other SQL gotchas!

Here's a gist with an example of the powerful models you can create with this! https://gist.github.com/elpete/80d641b98025f16059f6476561d88202

Usage

To start a new query, instantiate a new Builder: wirebox.getInstance('QueryBuilder@qb').

By default, qb uses a generic Grammar. You can specify your specific grammar in ColdBox by setting the defaultGrammar in your moduleSettings.

moduleSettings = {
    qb = {
        defaultGrammar = "MySQLGrammar@qb"
    }
};

If you are not using WireBox, just make sure to wire up the Builder object with the correct grammar:

var grammar = new qb.models.Query.Grammars.MySQLGrammar();
var builder = new qb.models.Query.Builder( grammar );

v8.0.0

Where clauses with an OR combinator are now automatically wrapped inside callbacks

This isn't a breaking change that will affect most people. In fact, it will most likely improve your code.

Previously, when using the control flow function, you were fully responsible for the wrapping of your where statements. For example, the following query:

Would generate the following SQL:

The problem with this statement is that the OR can short circuit the active check.

The fix is to wrap the LIKE statements in parenthesis. This is done in qb using a function callback to where.

When using the when control flow function, it was easy to miss this. This is because you are already in a closure - it looks the same as when using where to group the clauses.

In qb 8.0.0, when will automatically group added where clauses when needed. That means our original example now produces the SQL we probably expected.

Grouping is not needed if there is no OR combinator. In these cases no grouping is added.

If you had already wrapped your expression in a group inside the when callback, nothing changes. Your code works as before. The OR combinator check only works on the top most level of added where clauses.

Additionally, if you do not add any where clauses inside a when callback, nothing changes from qb 7.

The breaking change part is if you were relying on these statements residing at the same level without grouping. In those cases, you may pass the withoutScoping flag to the when callback.

v7.0.0

Lucee 4.5 and Adobe ColdFusion 11 EOL

Support for Lucee 4.5 and Adobe ColdFusion 11 has been dropped. If you need support for these engines, please remain on an earlier version of qb.

MSSQLGrammar renamed to SqlServerGrammar

MSSQLGrammar was visually too close to MySQLGrammar and was hard to differentiate quickly. SqlServerGrammar is much more unique and easily identifiable. Additionally, more people that use this library refer to their database engine as "SQL Server" than "MSSQL".

Variadic Parameters Support Removed

Variadic parameter support was the ability to pass any number of arguments to certain methods like select.

This code came with a slight performance cost and readability cost. That, combined with the fact that the above syntax is very close to an array, we are dropping support for variadic parameters. To migrate, wrap instances of variadic parameters in an array:

defaultGrammar updated to be the full WireBox mapping

In previous versions, the value passed to defaultGrammar was used to look up a mapping in the @qb namespace. This made it difficult to add or use grammars that weren't part of qb. (You could get around this be registering your custom grammar in the @qb namespace, but doing so seemed strange.)

To migrate this code, change your defaultGrammar to be the full WireBox mapping in your moduleSettings:

value method argument order changed

A defaultValue parameter and optional exception throwing was added to value. This pushed the options struct to the end of the method. If you are using positional parameters with value, you will need to update your method calls to either use named parameters or the new positions.

Some methods renamed callback to query

All methods that could conceivably take a subquery as well as a value now accept a closure or another builder instance to use as a subquery. This led to changing the callback argument to query in the following cases:

• whereSub

• whereInSub

• whereExists

• orWhereExists

• whereNotExists

• andWhereNotExists

• orWhereNotExists

• whereNullSub

• orderBySub

• subSelect

If you are using named parameters with any of the above methods you will need to migrate your method calls.

v5.0.0

Version v5.0.0 brings support for SchemaBuilder inside qb. To avoid naming confusion, Builder was renamed to QueryBuilder. Any references in your code to Builder@qb need to be updated to QueryBuilder@qb.

Where Methods

where

Adds a where clause to a query.

Any of the following operators can be used in a where clause.

When using the "=" constraint, you can use a shortcut and define the value as the second argument.

To group where statements together, pass a function to the where clause as the only parameter.

A Function or QueryBuilder can be used as a subselect expression when passed to value.

andWhere

orWhere

whereBetween

Adds a where between clause to the query.

If a function or QueryBuilder is passed it is used as a subselect expression.

whereNotBetween

whereColumn

Adds a where clause to a query that compares two columns.

Just as with where, when using "=" as the operator you can use a shorthand passing the second column in as the operator and leaving the second column null.

Expressions can be passed in place of either column.

whereExists

Adds a where exists clause to the query.

It can be configured with a function.

It can also be configured with a QueryBuilder instance.

whereNotExists

whereLike

whereIn

Adds a where in clause to the query.

The values passed to whereIn can be a single value, a list of values, or an array of values.

If a list of values is passed in, it is converted to an array of values using a single comma (",") delimiter.

Expressions can be freely mixed in with other values.

A function or QueryBuilder instance can be passed to be used as a subquery expression instead of a list of values.

whereNotIn

whereRaw

Shorthand to add a raw SQL statement to the where clauses.

whereNull

Adds a where null clause to the query.

whereNotNull

Dynamic Where Methods

qb uses onMissingMethod to provide a few different helpers when working with where... methods.

andWhere... and orWhere...

Every where... method in qb can be called prefixed with either and or or. Doing so will call the original method using the corresponding combinator.

where{Column}

If you call a method starting with where that does not match an existing qb method, qb will instead call the where method using the rest of the method name as the first column name. (The rest of the arguments will be shifted to account for this.) This also applies to andWhere{Column} and orWhere{Column} method signatures.

Specifying A Select Clause

You may not always want to select all columns from a database table. You can influence the select list of a query with the following methods.

Individual columns can contain fully-qualified names (some_table.some_column), table aliases (alias.some_column), and even set column aliases themselves (some_column AS c). The columns argument can be a single column, a list of columns (comma-separated), or an array of columns.

select

When calling select any previous columns are discarded. If you want to incrementally select columns, use the addSelect method.

If you pass no columns to this method, it will default to "*".

distinct

Calling distinct will cause the query to be executed with the DISTINCT keyword.

addSelect

This method adds the columns passed to it to the currently selected columns.

selectRaw

A shortcut to use a raw expression in the select clause.

The expression is added to the other already selected columns.

subSelect

The method lets you pass either a callback or a QueryBuilder instance to be used as a subselect expression. If a callback is passed it will be passed a new query instance as the only parameter.

The subselect is added to the other already selected columns.

clearSelect

Clears out the selected columns for a query along with any configured select bindings.

reselect

reselectRaw

Clears out the selected columns for a query along with any configured select bindings. Then adds an Expression or array of expressions to the already selected columns.

8.0.3

• Ignore select bindings for aggregate queries.

• Allow spaces in table aliases.

• Split FLOAT and DECIMAL column types in SQL Server.

8.0.2

• Clear orderBy bindings when calling clearOrders.

8.0.1

• Trim table definitions before searching for aliases. Makes qb more lenient with extra whitespace.

8.0.0

BREAKING CHANGES

• callbacks now automatically scope and group where clauses when an OR combinator is used.

Other Changes

7.10.0

• Expose nested where functions to enable advanced query manipulation in downstream libraries like Quick.

7.9.9

• Fixes for OracleGrammar including table aliases and wrapped subqueries.

7.9.8

7.9.7

7.9.6

7.9.5

• Handle enhanced numeric checks with Secure Profile enabled.

7.9.4

• Allow raw statements in basic where clauses.

7.9.3

7.9.2

7.9.1

• Handle multi-word columns in queryRemoveColumns.

7.9.0

• Remove elvis operator due to ACF compatibility issues

7.8.0

7.7.3

7.7.2

• Compatibility fix for ACF 2018 and listLast parsing.

• Ignore table qualifiers for insert and update.

7.7.1

• Fix a bug with preventDuplicateJoins when using the closure syntax with a join.

7.7.0

• Add executionTime to the data output from BaseGrammar, including being available in interceptors.

7.6.2

• Fix a case where a column was not wrapped correctly when a where used a subquery for the value.

7.6.1

• Avoid duplicate function due to cbORM / Hibernate bugs when used in the same application.

7.6.0

• Split off a private whereBasic method. This is used in Quick to provide extra sql type features.

7.5.1

Fixed an issue using column formatters with update and insert.

7.5.0

Using a new preventDuplicateJoins setting in the module settings, qb can detect duplicate joins and ignore them. This is especially useful in a heavily filtered and dynamic query where you may or may not need the join at all or more than one column may need the same join. preventDuplicateJoins defaults to false, so it is opt-in. It may be turned on by default in a future breaking release of qb.

7.4.0

You can now use two shortcut methods: orderByAsc and orderByDesc. Additionally, orderBySub or using orderBy with a closure or builder instance will respect the direction argument.

7.3.15

7.3.14

7.3.13

7.3.12

7.3.9, 7.3.10, 7.3.11

7.3.8

7.3.7

7.3.5, 7.3.6

7.3.4

7.3.2, 7.3.3

7.3.1

• Fix for null values breaking the new checkIsActuallyNumeric method in QueryUtils.

7.3.0

• Add a parameterLimit public property to SqlServerGrammar. This property is used in Quick to split up eager loading to work around the 2100 param limit of SQL Server.

7.2.0

7.1.0

• Lambdas (arrow functions) are now allowed wherever closures are allowed.

7.0.0

BREAKING CHANGES

• Drop support for Lucee 4.5 and Adobe ColdFusion 11.

• MSSQLGrammar renamed to SqlServerGrammar

• Remove variadic parameters support in builder functions like select.

• The defaultGrammar mapping needs to be the full WireBox mapping, including the @qb, if needed.

  • For instance, MSSQLGrammar would become MSSQLGrammar@qb.

  • This will allow for other grammars to be more easily contributed via third party modules.

• The argument names of forPage changed to match the new paginate method.

• Add defaultValue and optional exception throwing to value. (This changed the argument order.)

• All methods that could conceivably take a subquery as well as a value now accept a closure or another builder instance to use as a subquery. (This changed the argument names in some instances.)

Other Changes

• Completely revamped documentation! (You're looking at it right now.)

• Preserve column case and order when converting a query to an array using the default "array" return format.

• Allow closures to be used in left and right joins.

• Add raw in alterTable segments.

• Add dropAllObjects support for SqlServerGrammar and OracleGrammar to support migrate fresh from cfmigrations.

• Add a renameTable alias for rename.

• Remove default constraints when dropping columns with a default on SqlServerGrammar.

• Add more column types and column helpers to SchemaBuilder, including:

  • datetimeTz

  • lineString

  • nullableTimestamps

  • point

  • polygon

  • softDeletes

  • softDeletesTz

  • timeTz

  • timestamps

  • timestampTz

  • timestampsTz

  • withCurrent

6.4.0